Gas Detection Devices
Our gas detectors are handy, mobile devices designed for use in harsh, noisy environments. They are equipped with powerful sensors that can be calibrated to individual gas requirements. The sensors feature very short T90 response times as they continuously monitor gas concentrations of the surrounding environment. If the detectors measure dangerous gas concentrations, you are warned with audible, visual and vibration alerts. The measured values can be observed on the LCD display at any time.
Single Gas Detector
The Single Gas Detector is a single gas detector designed for mobile measurements in harsh or noisy environments. The device has powerful sensors and can be calibrated to individual gas measurement requirements. Its robust housing protects it from dust and water jets.
Usage
The Single Gas Detector is available in up to 28 different configurations. The measurement is continuous. When the defined alarm thresholds are reached, the device warns you by a red flashing LED, noticeable vibration and an acoustic signal with a volume of 90 dB.
Model A
Model B
- Worldwide recognized, highly sensitive sensors
- Lightweight and compact design
- Simplified operation
- Audio-visual alarm (red warning light, 90dB audio signal)
- Vibrating alarm ideal for noisy environments
- Robust, shockproof housing
- 3.0-V lithium battery that works continuously for about 24 months (non-alarming state)
- Degree of protection:
Exib IIC T3 / IP65 [dustproof and protected against water jets from nozzles (Model A)]
IP67 [dustproof and for temporary submerging in water (Model B)] - Certifications: CE, CMC, Ex, MA
- Dimensions (W x H x D) – Model A:
56 x 109 x 38 mm - Dimensions (W x H x D) – Model B:
57 x 95 x 32 mm - Measurable Gases: 1
- Sampling: Diffusion
- Measurement Precision: ± 5% (F.S)
- Alarm Modes: Audio/Visual and Vibration
- Pressure Tolerance: 0,86 ~ 1,06 bar (12.5 – 15.4 psi)
- Relative Humidity: 15 – 90 % RH
- Working Temperature: -20°C … 55°C (-4°F … 131°F)
- Power: 3V Lithium Battery
Multi Gas Detector
The Multi Gas Detector has a handy and robust design. It has a stable, dustproof and waterproof housing and is able to measure up to five gases simultaneously. In addition, the measuring device has a rechargeable battery and comes with a charger. The measured values can be read on an LCD display on white or black background.
Usage
The Multi Gas Detector has powerful sensors and short T-90 reaction times. Gas measurement is continuous. As soon as the defined alarm thresholds are reached, the device emits a warning signal comprised of a red flashing LED, noticible vibration and acoustic signal with a volume of 90 dB. Therefore, the Multi Gas Detector is ideal for loud, rough environments.
Model A
Model B
- Worldwide recognized, highly sensitive sensors
- Lightweight and compact design
- Simplified operation
- Audio-visual alarm (red warning light, 90dB audio signal)
- Vibrating alarm ideal for noisy environments
- Robust, vibration-proof housing
- Rechargeable 3.7 V lithium battery
- Degree of protection: Exib IIC T3 / IP67 (dustproof and waterproof when temporarily submerged)
- Certifications: CMC, Ex, MA
- Dimensions (W x H x D) – Model A:
70 x 133 x 36 mm - Dimensions (W x H x D) – Model B:
70 x 132 x 38 mm - Weight: 300g
- Measurable Gases: 5
- Sampling: Pump, Diffusion
- Measuring Ranges:
O2 = 0 … 30 Vol.-%
LEL = 0 … 100 LEL
CO = 0 … 1999 ppm
H2S = 0 … 100 ppm
PID (VOCs < 10.6 eV) = 0 ... 1999.9 ppm - Measuring Precision: ± 5% (F.S)
- Alarm Points:
18.0/23.0 Vol.-%
25.0/50 % LEL
50/100 ppm
10/20 ppm - Alarm Modes: Audio-Visual alarm and Vibration
- Relative Humidity: 15 – 90 % RH
- Working Temperature: -10°C … 44°C (14°F … 111°F)
- Power: 3,7V Lithium Battery (rechargeable)
- Time of operation: approx. 10 h (between charges)