Front view
Gas Analyzer 150
The Gas Analyzer 150 offers you reliable and precise measurements in demanding environments. Designed for monitoring environmental and safety-critical processes, this powerful device is the ideal solution for safely analyzing harmful solvents such as perchloroethene, trichloroethene and dichloroethane.
The Gas Analyzer 150 is your precise solution for monitoring environmental and safety-critical applications. Designed for fast and reliable measurement of harmful gases such as perchloroethene, trichloroethene and dichloroethane, this device provides accurate analysis in industrial processes, especially in dry cleaning and surface treatment. With its robust 19-inch rack-mount housing and pressure compensation capability, the Gas Analyzer 150 fits perfectly into your existing infrastructure and guarantees long-term stability and operational reliability.
The Gas Analyzer 150 impresses with state-of-the-art NDIR technology (non-dispersive infrared) with a heated cuvette for reliable measurements even under demanding conditions. The direct measured value display via a resistive 2.5-inch touch display enables intuitive operation and fast results. Equipped as standard with a gas flow rate of 4 l/min and pressure compensation for a process gas pressure of 0.7 to 1.1 bar, the analyzer guarantees stable measurements even under fluctuating ambient conditions.
The Gas Analyzer 150 is used in a wide range of industries, from metal degreasing to parts cleaning. Typical areas of use include chemical processes that use harmful solvents and require the highest accuracy in emissions monitoring. Its flexibility makes it ideal for a wide range of applications where safety and precision are paramount.
- Measurement principle: NDIR single-beam method, cuvette heated to 60 °C
- Measuring range: 2 mg/m³ to 40 g/m³
- Measuring accuracy: < 3 % of the measured value
- Gas flow rate: standard 4 l/min, internal gas routing made of PTFE (optionally stainless steel)
- Communication: RS232 standard, optional Profibus DP, Ethernet IP, Modbus TCP, Profinet
- Operational readiness: Measurement readiness can be reached after 60 seconds
- Operating voltage: 230V AC / 50 Hz, 0.9 A / 207 VA
Advantages
Reliable measurement results from the very first minute
The Gas Analyzer 150 delivers precise measurement data shortly after start-up and reaches its full specification after 30 minutes. This allows you to start monitoring your processes at an early stage without losing valuable time – ideal for environments where fast and reliable analyses are crucial.
Maximum flexibility with the measurement parameters
The Gas Analyzer 150 is designed in such a way that it can be flexibly adapted to the specific requirements of your industrial applications. Thanks to the ability to connect up to eight different measuring points, you can analyze and monitor different process gases with just one device.
Minimal calibration effort and low service costs
With the Gas Analyzer 150, you reduce operating costs through low calibration effort and minimal maintenance requirements. The device is designed to work reliably over long periods of time without the need for frequent calibrations. You also benefit from low service costs and high availability.
FAQ
How long does it take for the Gas Analyzer 150 to be ready for use?
The Gas Analyzer 150 is ready for operation after about 60 seconds and displays the first measurement results. A warm-up time of 30 minutes is required for full specification and maximum accuracy.
Which gases can the Gas Analyzer 150 measure?
The Gas Analyzer 150 is specially designed for measuring harmful gases such as perchloroethene, trichloroethene and dichloroethane. Thanks to its flexible connection options, it can be expanded to up to eight measuring points and thus analyze several gas samples simultaneously.
How often does the device need to be calibrated?
The Gas Analyzer 150 is characterized by low calibration costs. As a rule, one calibration per year is sufficient, which minimizes your service costs and maximizes the availability of the device.
Can the Gas Analyzer 150 be integrated into existing systems?
Yes, the device is equipped with standard communication interfaces such as RS232, Profibus DP, Ethernet IP, Modbus TCP and Profinet and can be seamlessly integrated into existing control systems.
What maintenance is required?
The Gas Analyzer 150 is designed to operate reliably over long periods of time and requires minimal maintenance. The robust construction and durable stainless steel design minimize the need for frequent servicing.
In which temperature and pressure ranges can the Gas Analyzer 150 be used?
The Gas Analyzer 150 works reliably in an ambient temperature range of 5°C to 45°C and a pressure range of 0.7 to 1.1 bar. The pressure compensation ensures consistent measurement results, even with slight pressure fluctuations
What is the measuring accuracy of the device?
The Gas Analyzer 150 achieves a measuring accuracy of less than 3 % of the measured value in the range from 2 mg/m³ to 40 g/m³. This high accuracy makes it ideal for safety-relevant applications in industry.
How is the gas flow regulated?
The device operates with a gas flow rate of 4 l/min as standard, which ensures efficient and precise analysis of the gas samples. The internal gas routing is made of PTFE, but can be switched to stainless steel if required.
What display and operating options are available?
The Gas Analyzer 150 is equipped with a resistive 2.5-inch touch display for intuitive operation. All measurement data and system information is displayed clearly and in real time.
How reliable is the Gas Analyzer 150 in continuous operation?
Thanks to its robust design and minimal calibration effort, the Gas Analyzer 150 is designed for continuous operation. It offers high long-term stability and is tailored to the requirements of industrial customers in safety-critical areas.
Well? Interested?
Contact us for comprehensive advice - holistic and solution-oriented.
Fresenius Umwelttechnik GmbH
Office hours
Time zone CEST
The company
Contact us
© 2024 Fresenius Umwelttechnik GmbH
